Signed in as:
Signed in as:
DD-Xpand (Coarse) can be used as
DD-Xpand (Fine) can be used
Unique formulation provides excellent protection against
Air operated and time activated, completely self-contained and easy to install.
It can be used to inject a wide range of different products such as:
If injecting foam, a Matex soluble lubricant must be used to avoid rust that could be caused from the foam.
A high performance, but economical foam formulated for the cost-conscious driller.
An environmentally acceptable foaming agent to be used in
Gives an immediate tight foam with good lifting characteristics.
Greenplus Form Release is an environmentally safe form release designed for use with
Greenplus Form Release is:
Applied neatly by spraying, brushing, or swabbing.
A unique DSPA providing a drilling fluid capable of stabilizaing the most difficult sand and gravel conditions.
Assists in inhibiting the swelling of clay-like materials such as saprolites, talcs & kimberlites which in turn, eliminates bit-balling.
It is a superior product for borehole stabilization and encapsulation of solids.
BestoLife Cal Bronze (CB) is an all-purpose compound for rotary-shouldered connections, casing, and tubing. A copper/lead/zinc based compound, Cal Bronze is recommended for drill collars in light to medium duty drilling, drill pipes, and casing and tubing connections that require a thread compound for high temperature/high pressure conditions.
Economical copper compound for use on drill collars and drill pipe.
Greenplus Hydraulic Fluid has high performance lubrication properties which result in significantly less wear on your equipment’s hydraulic components.
Greenplus Hydraulic Fluid is not just rapidly biodegradable and operator-safe and made from renewable resources, but it is also environmentally safe. When an accidental spill occurs, the risk to the environment is reduced, risk of liability is minimized and negative media coverage can be avoided.
Greenplus Hydraulic Fluid base stock is made from vegetable oils with a very high natural viscosity index.
RDO 302 ES is a unique product developed for all types of drilling where rock drill oils are used, such as DTH, air tracks, percussion drills, casing drivers, and top hammers to save wear and improve their performance.
RDO 302 ES reduces the potential of surface or groundwater environmental damage during mining production, mineral exploration, construction of roads and pipelines, quarrying, water well drilling, and oil and gas exploration.
RDO 302 ES has proprietary lubricating compounds that are not washed off by moisture, thus offering protection when drilling with water. Rust does not develop on internal parts when the hammer is not used.
RDO 302 ES (SOL) reduces the potential of surface or groundwater environmental damage during mining production, mineral exploration, construction of roads and pipelines, quarrying, water well drilling, and oil and gas exploration.
RDO 302 ES (SOL) has proprietary lubricating compounds that are not washed off by moisture, thus offering protection when drilling with water. Rust does not develop on internal parts when the hammer is not used. Lubrication can be better controlled and consumption reduced by using RDO 302 ES.
RDO 302 ES (SOL) has a special filming additive that prevents piston scuffing and heat build up. Purchase of internal hammer parts is reduced dramatically.
Information on HDD Fluids by MATEX
How to mix Matex products and in which order for best results.
Drilling Fluid Thinner
Clay Break drilling fluids thinner is an environmentally safe, synthetic organic liquid polymer which lowers mud viscosity and gel strengths of all conventional water based drilling muds.
Clay Break also aids in filtration control and can be used to overcome differential sticking of rods as well as treating mud rings.
Clay break best followed with Torqueless to prevent re-establishment of bit balling and mud rings.
Gravel Stop is an environmentally safe, very high molecular weight, powdered viscosifier that can be used in either fresh or brine water. It is used consistently in HDD drilling.
Gravel Stop is effective in drilling conditions where groundwater temperatures exceed 150°F.
Gravel Stop is the preferred mix in winter conditions (powder).
Gravel Stop reduces DTH Torque due to its excellent holding power.
Hole Coat is used to coat your bore hole.
Hole Coat is a highly concentrated product that rapidly develops into a very high viscosity fluid when mixed with water.
Hole Coat provides viscosity yields 40-50% greater than conventional liquid polymers, and can be used in fresh or brine water.
Hole Coat is an excellent inhibitor against shales, clays, fractured zones, sand and blocky formations, and contaminants.
One Shot is an all dry powder polymer with triple action to cover most drilling problems. This product is specially formulated to respond to clay, sand and unconsolidated geological formations. This product increases viscosity and imparts excellent stabilization and fluid loss properties.
One Shot increases the meters drilled per shift.
One Shot has effectively stopped water sands from collapsing into the bore hole.
One Shot works with Torqueless and does not require a complicated multi-component mud system.
Sand Drill should always be premixed with Torqueless. (recommended ratio: 1 part Sand Drill to 2 parts Torqueless.)
The Sand Drill premix is then introduced in the mixing system with water.
1-3 liters Sand Drill per 1000 liters of water
1-3 quarts Sand Drill per 250 gallons of water.
A DSPA providing a drilling fluid capable of stabilizing and maximizing the encapsulation of core recovery in the most difficult sand and gravel conditions.
Copyright © 2022 Foothills Drilling Equipment - All Rights Reserved.
Website Design by Summit Marketing